I’ve been printing for almost 3 months now and I’ve gotten my Maker Select V2 tuned fairly well and have had pretty good success with my prints until it comes to overhang areas or areas that require support material. For example my latest print falls flat when it needs to bridge or print on top of support material. I get an ugly grid pattern on any horizontal areas where support has been used and my layers droop on the outside leaving an ugly final product. What do you all recommend for situations like this?I’m currently running a .6mm nozzle on a Swiss MK10 hotend with the Z-Brace mod to reduce the vibrations.My current settings on Cura 15.04.6 are:0.3 layer height1.2 shell thicknessretraction enabled 1.2 bottom/top thickness20% infill 25mm/s210C extruder temp50C bed tempSupport Tab50-65 degree angle for support15% infill0.7 X/Y Dist0.14 Z Dist40mm/s Retraction Speed0.5mm Retraction Distance15 second layer time http://ift.tt/2czMij2