Hi, so I have heard how versatile swapping the stock extruder for the microswiss kit was. I decided to pick some up and try installing it. I did the installation exactly as the instructions said to and watched multiple videos to be able to help. I everything install and preheated for the final tightening of the extruder nozzle. I set my printing temperate at 245c before feeding the filament through and letting it run for about 30 seconds. I ended up setting up a test cube after I leveled the bed as well. Tried to start printing at 220c for woodfill pla with 1.5mm retraction distance and 2000 mm/s for retraction speed and initiated the print and then bam the nozzle is clogged. I did the same thing adjust the temp retraction speed and distance for my second nozzle which was cheap flashforge brand white abs and the same thing happened when trying to print a cube. I thought I had set it all up correctly but what could be wrong? p.s. all these were printing well with the PTFE lined nozzle (white abs looked like crap but you get what you pay for) Thanks in advance for any help http://ift.tt/1tDWiiY