http://ift.tt/2H3v7FR http://ift.tt/2G2H64O
I ran out of PETG 28 hours into a 33-hour print, had a spare spool of ABS that printed at the same temperature, and successfully swapped them out mid-print.
Month: February 2018
Since you all enjoyed my last print, here’s the latest, a 33-piece support-less print of Curiosity from NASA
http://ift.tt/2nOyqID http://ift.tt/2nUzqKC
I made a drone ship coaster to celebrate the Falcon Heavy launch!
http://ift.tt/2G3Fp7A http://ift.tt/2H4hIxg
first print on my anycubic i3 mega in 2018! finally fixed
http://ift.tt/2G1ST3n http://ift.tt/2H012H7
29 hour print of one of Make Anything’s sculptures.
http://ift.tt/2G3xN50 http://ift.tt/2H3mtqz
Prusas printing farm today
https://www.youtube.com/watch?v=qqQzTvvrXo8 http://ift.tt/2BhCetL
Is there a way to increase wall thickness to say several layers when printing in Vase mode on Simplify3D? I have “merged all outlines into single model” option activated and running 0.2mm layer thickness. The result is absolutely stunning but a bit weak due to just one outline layer drawn. Thanks!
http://ift.tt/2C8ErUX http://ift.tt/2EfagkX
With all this excitement about 3D Printing on Fabric I thought I’d put together a quick Tutorial video on the process
https://youtu.be/CjH5KGw3Psw http://ift.tt/2Ed1xMc
I 3D-printed my own sneakers
https://www.youtube.com/watch?v=zt4xM5zRn-U&feature=youtu.be http://ift.tt/2BO9zgO
Kill La Kill – Ryuko Matoi
http://ift.tt/2BMTKHa http://ift.tt/2BjLa1v